Product Overview This profile has a width of 40mm. (1.6in.). Making this single-sided SEG extrusion the thinnest of them all. Less than half the profile width of 1.6in WALL/FLOOR SEG, the outside finish is solid and smooth aluminum. This profile is suitable for wall mounted and free standing displays.The silicone beading can fit 12mm. (.47 in)deep and 3 mm. (.15 in.) wide into the trough of the frame. Not compatible with lights (cannot be backlit).
Quick Install and Set Up Overview Remove extrusion and parts out of your packaging. Layout out your pieces. Find one of your “L” Brackets with screw. Insert one of corner “L” brackets to the end of one of the extrusion stick. Tighten the brackets with the Allen Wrench provided. Then repeat with all the corners.
Wall Mount Next you’ll want to pre-drill in your wall mounts (Provided with Graphic Package options). Start with the wall mounts that will hold the top extrusion. Evenly space them out under the top extrusion frame. Don’t forget to level the wall mounts. Once you have your frame and top wall mounts set. Hang the extrusion on top of the wall mounts. Then drill in the remaining wall mounts inside of the bottom extrusion to set in place your frame. Wall mounts will be hidden once you place your graphic on to the frame.
Then place your SEG (Silicone Edge Graphic) Graphics into the frame grooves, keeping a tight and finished look.
Features: Material: Stretch Fabric Print Process: Dye Sub Printing Warranty: One (1) year on graphics
What is SEG (Silicone Edging Graphics)? SEG is a fabric graphic finished with a thin silicone strip. The silicone strip is sewn directly to the edge of the graphic, and the strip is then inserted into a frame with a recessed groove.
Product Applications: • Wall Decoration for home & office • Retail store wall advertising • Locker rooms • and Much more