Turnaround Time: 2 Business Days
Product OverviewWith a solid outside finish unlike the 1.6in WALL/FLOOR SEG, the 1.6in WALL SEG is a single-sided extrusion with a profile width of 40mm. The 1.6in WALL SEG is rigid because its backside has a longer metal edge for reinforcement, making it especially great for wall mounting. When installing the fabric graphic, the keder can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)
Quick Install and Set Up Overview
Remove extrusion and parts out of your packaging. Layout out your pieces. Find one of your “L” Brackets with screw. Insert one of corner “L” brackets to the end of one of the extrusion stick. Tighten the brackets with the Allen Wrench provided. Then repeat with all the corners.
Wall Mount
Next you’ll want to pre-drill in your wall mounts (Provided with Graphic Package options). Start with the wall mounts that will hold the top extrusion. Evenly space them out under the top extrusion frame. Don’t forget to level the wall mounts. Once you have your frame and top wall mounts set. Hang the extrusion on top of the wall mounts. Then drill in the remaining wall mounts inside of the bottom extrusion to set in place your frame. Wall mounts will be hidden once you place your graphic on to the frame.
Then place your SEG (Silicone Edge Graphic) Graphics into the frame grooves, keeping a tight and finished look.
What is SEG (Silicone Edging Graphics)?
SEG is a fabric graphic finished with a thin silicone strip. The silicone strip is sewn directly to the edge of the graphic, and the strip is then inserted into a frame with a recessed groove.
Product Applications:
• Wall Decoration for home & office
• Retail store wall advertising
• Locker rooms
• and Much more
Frame Only Includes:
• Frame w/ L corner Brackets
• Wall Mounts
• Single-sided Fabric Graphics w/SEG Finishing
Template |
Specsheet |
Instructions |
|
|
|